30x60 Metal Building: 2026 Prices and 6 Popular Layouts
A 30x60 metal building gives you 1,800 square feet in a long, narrow footprint. It is a favorite for shop and garage combos, small barndominiums and storage buildings, because it fits on a typical rural lot and still leaves room for a big door at each end.
For 2026, a basic 30x60 kit costs about $30,600 to $37,800, and turnkey buildings usually land between $54,000 and $81,000. Below we break down the price, six layouts that work well and how to save money.
30x60 Metal Building Price
| Cost item | Per sq ft | 30x60 total |
|---|---|---|
| Kit only (12 ft eave) | $17 to $21 | $30,600 to $37,800 |
| Kit with 16 ft eave | $19 to $23.50 | $34,200 to $42,300 |
| Erection | $4 to $12 | $7,200 to $21,600 |
| 4 inch slab | $5 to $9 | $9,000 to $16,200 |
| Insulation (fiberglass) | $0.50 to $1.50 | $900 to $2,700 |
| Turnkey total | $30 to $45 | $54,000 to $81,000 |
Kit prices for buildings under 40 feet wide run higher per square foot, about $17 to $21, because smaller buildings spread the fixed costs of end walls, trim and engineering over less floor. That is the same range our metal building cost calculator uses. Erection, slab and insulation rates match our other size guides.
30x60 or 40x45?
Both give you about 1,800 square feet. The 30x60 is easier to fit on a narrow lot and often has a lighter frame. A 40x45 gives you a wider clear span, which helps if you want to park side by side. If you are unsure, price both.
6 Popular 30x60 Layouts
| Layout | How the space splits | Best for |
|---|---|---|
| Three bay garage | Three 10 foot doors on the long side, storage at one end | Cars, boats, trailers |
| Drive through shop | A 12 or 14 foot door at each end | Pulling trailers straight through |
| Shop with office | 1,500 sq ft shop, 300 sq ft office or bathroom | Small businesses, contractors |
| Barndominium | 1,200 sq ft home, 600 sq ft shop | Living space with a workshop |
| Full home | 1,800 sq ft, two to three bedrooms | Rural homes on narrow lots |
| Storage barn | Open floor with lean to optional | Hay, equipment, feed |
For living space layouts, our shop with living quarters guide covers what codes ask for once people sleep in the building.
Concrete for a 30x60
A 4 inch slab needs about 22.2 cubic yards of concrete, or 24.4 with a 10% waste allowance. At a 6 inch thickness, plan on about 36.7 yards including waste. Price yours with the concrete slab calculator.
Height, Doors and Options
A 12 foot eave is enough for cars and pickups. Fourteen feet fits most boats on trailers and box trucks, and 16 feet gives room for a camper. Taller walls raise the kit price because frames, girts and panels all get bigger. Plan door sizes before you order, since framed openings are cheaper from the factory than cut later.
- Insulation: a fiberglass blanket system costs about $0.50 to $1.50 per square foot of floor here. See our insulation guide for better options.
- Lean to: a 10 or 12 foot lean to along the long side adds covered parking for much less than a wider building.
- Windows: a row of windows along one side makes a shop far nicer to work in.
Ways to Keep the Price Down
- Stick with standard widths and bay spacing from the supplier.
- Choose a single slope or simple gable roof.
- Compare kit plus local erection against turnkey quotes. See our erection cost guide.
- Order in the off season when crews and suppliers have more room.
- Confirm wind and snow loads match your county so you are not overbuilding.
Planning Checklist for a 30x60
Before you request quotes, settle a few decisions so every supplier prices the same building. Pick an eave height based on your tallest door, since a 12 foot eave suits most cars and pickups while a 14 or 16 foot eave fits campers and equipment. Decide how many roll up doors you want and which walls they go on, and whether you need walk doors at both ends for safety. Choose a roof style and panel gauge, and ask for the snow and wind ratings your county requires. Finally, plan the slab thickness and where utilities will enter, because running conduit before the pour costs far less than cutting concrete later. A clear spec makes quotes easy to compare and avoids surprise change orders once the steel arrives.
FAQ
How much does a 30x60 metal building cost?
About $30,600 to $37,800 for a basic kit and $54,000 to $81,000 turnkey in 2026.
How much concrete for a 30x60 slab?
About 22.2 cubic yards at 4 inches thick, or 24.4 with 10% waste.
Can I live in a 30x60 metal building?
Yes. Many owners build a 1,200 square foot home with a 600 square foot shop, or use the full 1,800 square feet as a home, as long as it meets local residential codes.
Sources
- U.S. Bureau of Labor Statistics, PPI series WPU1017, steel mill products, checked October 2026.
- Rex Metal Buildings cost calculator rates and size guides.
Ready to price your building? Get free metal building quotes from suppliers who serve your area, or use the form on this page and our team will be in touch.